--- /dev/null
+This package uses quilt to manage the patches in debian/patches.
+For further information please install the quilt package and read
+/usr/share/doc/quilt/README.source.
--- /dev/null
+mysqltcl (3.05-7) experimental; urgency=low
+
+ * Temporarily build-depend on libmysqlclient-dev (>= 5.5.17) to
+ ensure that we really build against the new libmysqlclient in
+ experimental.
+
+ -- Sven Hoexter <hoexter@debian.org> Sat, 26 Nov 2011 13:22:02 +0100
+
+mysqltcl (3.05-6) experimental; urgency=low
+
+ * Apply a small patch (forwarded from Ubuntu!) to debian/rules adding
+ --with-mysql-lib so that mysqltcl will work with a multiarch
+ libmysqlclient. (Closes: #650053)
+ * Include /usr/share/dpkg/buildflags.mk and use DPKG_EXPORT_BUILDFLAGS
+ in debian/rules. Add dpkg-dev (>= 1.16.1) to build-depends.
+
+ -- Sven Hoexter <hoexter@debian.org> Sat, 26 Nov 2011 09:57:34 +0100
+
+mysqltcl (3.05-5) unstable; urgency=low
+
+ * Add debian/patches/tcl.m4_gnu_non_linux_ld_settings, patch provided
+ by Pino Toscano (thanks!), to fix the FTBFS on GNU/Hurd. Since we've
+ the same problem on GNU/kfreebsd it will fix those FTBFS too.
+ (Closes: #624378)
+ * Add build-dep on dh-autoreconf and add --with autoreconf for dh.
+ * Add debian/patches/man-hyphen-and-spelling to fix some smaller issue
+ with the manpage flagged by lintian.
+
+ -- Sven Hoexter <hoexter@debian.org> Thu, 28 Apr 2011 09:52:33 +0200
+
+mysqltcl (3.05-4) unstable; urgency=low
+
+ * According to dev-ref 6.2.2 the short description is no sentence so
+ we should start in lowercase letters.
+ * Change maintainer address to hoexter@d.o.
+ * Update VCS-* information in debian/control to the new git repository.
+ * Convert to dh:
+ + Build-Depend on debhelper (>= 8).
+ + Increase compat level to 8.
+ + Shorten debian/rules to the bare essentials.
+ + Override dh_makeshlibs call to add tcltk-depends.
+ * Increase Standards-Version to 3.9.2, no changes required.
+ * Add ${misc:Depends} to the binary package.
+ * Add debian/source/format -> 1.0.
+ * Add a watch file (giving up ...).
+
+ -- Sven Hoexter <hoexter@debian.org> Wed, 27 Apr 2011 19:26:39 +0200
+
+mysqltcl (3.05-3) unstable; urgency=low
+
+ * Move to section 'database' to fit the archive wide overrides.
+
+ -- Sven Hoexter <sven@timegate.de> Wed, 05 Aug 2009 20:54:28 +0200
+
+mysqltcl (3.05-2) unstable; urgency=low
+
+ * Update debian/copyright with information about tests/all.tcl and
+ tclconfig/tcl.m4. Thanks to Ondrej Certik for noting it during a
+ package review.
+ * Bump Standards-Version to 3.8.2
+ + Added a README.source.
+ * Add a short description to the man-section patch.
+ * Stretch the long description a bit with footage from the manpage.
+ (Noted by Ondrej Certik)
+ * Build-Dep on libmysqlclient-dev now that MySQL 5.1 is default.
+
+ -- Sven Hoexter <sven@timegate.de> Tue, 04 Aug 2009 16:11:16 +0200
+
+mysqltcl (3.05-1) unstable; urgency=low
+
+ * New upstream release
+ + Bugfixes for mysql5 handling multiple result queries.
+
+ -- Sven Hoexter <sven@timegate.de> Sun, 25 May 2008 11:30:10 +0200
+
+mysqltcl (3.04-2) unstable; urgency=low
+
+ * Re-add --with-tcl and --with-tclinclude.
+
+ -- Sven Hoexter <sven@timegate.de> Thu, 14 Feb 2008 08:19:13 +0100
+
+mysqltcl (3.04-1) unstable; urgency=low
+
+ * New upstream release with
+ + Fix for mysql 5.
+ + Checking of mysql::state parameter length fixed.
+ * Standards-Version: 3.7.3 - no changes required.
+ * Changed compat to 5, Build-Depend on debhelper >> 5.
+ * Moved the homepage to the new Homepage field.
+ * Build-Depend now on tcl-dev instead of tcl8.4-dev.
+ * Use tcltk-depends to depend on the right Tcl version.
+ * Switched to use quilt to manage the patches.
+ * Added Vcs-Svn field to debian/control.
+ * Reworked debian/rules partly to make it a little bit clearer.
+ * Adopt the new Tcl/Tk policy and move the lib into /usr/lib/tcltk.
+ * Changed mysql to MySQL in the description. Thanks to Sergei and
+ lintian.
+
+ -- Sven Hoexter <sven@timegate.de> Wed, 13 Feb 2008 21:03:46 +0100
+
+mysqltcl (3.02-1) unstable; urgency=low
+
+ * New upstream release
+ * Changed Standards-Version to 3.7.2
+
+ -- Sven Hoexter <sven@timegate.de> Sun, 7 May 2006 17:53:25 +0200
+
+mysqltcl (3.01-2) unstable; urgency=low
+
+ * ACK Luk Claes NMU (Closes: #359296, #343784, #353920).
+ * Added the mysqltcl Homepage to the control file.
+ * Changed Standards-Version to 3.6.2
+ * Changed from DH_COMPAT 3 to DH_COMPAT 4 and moved it from rules
+ into the compat file. Build-Depends on debhelper >> 4
+ * Build as a normal package with .diff.gz (closes: #353919)
+ * Removed the dot from the end of the synopsis line in control
+ * Edited the manpage to fit in section 3
+ * Removed debian/dirs - everything we need is auto created
+ * Removed install-bin-binaries from Makefile.in so that we do not
+ create the empty bin directory in the package
+ * Removed commented out dh_* commands from rules
+ * Added myself as the current maintainer in the copyright and control file
+ * David N. Welton <davidw@dedasys.com> agreed that I take over the
+ maintenance of this package.
+
+ -- Sven Hoexter <sven@timegate.de> Mon, 10 Apr 2006 16:17:32 +0200
+
+mysqltcl (3.01-1.1) unstable; urgency=high
+
+ * Non-maintainer upload.
+ * Fix syntax error in tcl.m4 (Closes: #353920).
+ * Upgrade build depends to libmysqlclient15-dev (Closes: #343784).
+
+ -- Luk Claes <luk@debian.org> Mon, 27 Mar 2006 19:55:25 +0200
+
+mysqltcl (3.01-1) unstable; urgency=low
+
+ * New upstream release.
+ * mysqltcl: New upstream release available (v2.50)
+ * mysqltcl: Typo results in: Tcl_Release couldn't find reference
+
+ -- David N. Welton <davidw@debian.org> Sun, 30 Oct 2005 17:59:39 +0100
+
+mysqltcl (2.30-3) unstable; urgency=low
+
+ * Recompile against libmysqlclient12. Enable threads in Tcl configure.
+
+ -- David N. Welton <davidw@debian.org> Fri, 28 Jan 2005 15:55:33 +0100
+
+mysqltcl (2.30-2) unstable; urgency=low
+
+ * Fixed problem with directories.
+
+ -- David N. Welton <davidw@debian.org> Sat, 30 Aug 2003 13:27:31 +0200
+
+mysqltcl (2.30-1) unstable; urgency=low
+
+ * New upstream release
+
+ -- David N. Welton <davidw@debian.org> Sat, 26 Jul 2003 12:50:47 +0200
+
+mysqltcl (2.12-1) unstable; urgency=low
+
+ * New upstream release.
+
+ -- David N. Welton <davidw@debian.org> Wed, 26 Mar 2003 02:19:04 -0800
+
+mysqltcl (2.1-1) unstable; urgency=low
+
+ * New upstream release.
+
+ -- David N. Welton <davidw@debian.org> Mon, 9 Dec 2002 13:48:03 -0800
+
+mysqltcl (2.0rc11-5) unstable; urgency=low
+
+ * Updated config.guess and config.sub from /usr/share/misc. Let's hope
+ this time it works. Auto* sucks. (closes: #131058)
+
+ -- David N. Welton <davidw@debian.org> Fri, 1 Feb 2002 15:08:30 +0100
+
+mysqltcl (2.0rc11-4) unstable; urgency=low
+
+ * Updated config.guess and config.sub from ftp.gnu.org.
+ * (closes: #125964)
+
+ -- David N. Welton <davidw@debian.org> Wed, 2 Jan 2002 14:06:02 +0100
+
+mysqltcl (2.0rc11-3) unstable; urgency=low
+
+ * Added dependencies on mysql and tcl -dev packages.
+ * (closes: #121368)
+
+ -- David N. Welton <davidw@debian.org> Tue, 18 Dec 2001 23:30:28 +0100
+
+mysqltcl (2.0rc11-2) unstable; urgency=low
+
+ * Created package. (closes: #119129)
+
+ * Added man page.
+
+ -- David N. Welton <davidw@debian.org> Mon, 12 Nov 2001 13:33:19 +0100
+
+mysqltcl (2.0rc11-1) unstable; urgency=low
+
+ * Initial Release.
+
+ -- David N. Welton <davidw@debian.org> Sun, 11 Nov 2001 15:25:08 +0100
+
+
--- /dev/null
+Source: mysqltcl
+Section: database
+Priority: optional
+Maintainer: Sven Hoexter <hoexter@debian.org>
+Build-Depends: debhelper (>= 8), dpkg-dev (>= 1.16.1), tcl-dev,
+ libmysqlclient-dev (>=5.5.17), quilt, dh-autoreconf
+Standards-Version: 3.9.2
+Homepage: http://www.xdobry.de/mysqltcl/
+Vcs-Git: git://git.sven.stormbind.net/git/sven/mysqltcl.git
+Vcs-Browser: http://git.sven.stormbind.net/?p=sven/mysqltcl.git
+
+
+Package: mysqltcl
+Architecture: any
+Depends: ${shlibs:Depends}, ${tclsh:Depends}, ${misc:Depends}
+Description: interface to the MySQL database for the Tcl language
+ The mysqltcl package provides a Tcl interface to the MySQL database system.
+ Within Tcl you've a range of Tcl commands and a global Tcl array available
+ to access the database server.
+ Written in C mysqltcl uses the official MySQL C-API so that almost all
+ Tcl commands correspond to MySQL C-API functions.
--- /dev/null
+This package was debianized by David N. Welton <davidw@debian.org> on
+Sun, 11 Nov 2001 15:25:08 +0100.
+
+The current Debian maintainer is Sven Hoexter <sven@timegate.de>
+
+It was downloaded from http://www.xdobry.de/mysqltcl/
+
+Upstream Authors: Tobias Ritzau <tobri@ida.liu.se>, Artur Trzewik <mail@xdobry.de>
+
+Copyright:
+
+Most of the sourcecode falls under the following license:
+
+/*
+ * Copyright (c) 1994, 1995 Hakan Soderstrom and Tom Poindexter
+ *
+ * Permission to use, copy, modify, distribute, and sell this software
+ * and its documentation for any purpose is hereby granted without fee,
+ * provided that the above copyright notice and this permission notice
+ * appear in all copies of the software and related documentation.
+ *
+ * THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY
+ * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+ *
+ * IN NO EVENT SHALL HAKAN SODERSTROM OR SODERSTROM PROGRAMVARUVERKSTAD
+ * AB BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL
+ * DAMAGES OF ANY KIND, OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS
+ * OF USE, DATA OR PROFITS, WHETHER OR NOT ADVISED OF THE POSSIBILITY
+ * OF DAMAGE, AND ON ANY THEORY OF LIABILITY, ARISING OUT OF OR IN
+ * CONNECTON WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+
+
+The following files have a different license:
+tests/all.tcl
+tclconfig/tcl.m4
+
+ Copyright (c) 1998-2000 by Scriptics Corporation.
+ Copyright (c) 1999-2000 Ajuba Solutions.
+ Copyright (c) 2002-2005 ActiveState Corporation
+
+This software is copyrighted by the Regents of the University of
+California, Sun Microsystems, Inc., Scriptics Corporation, ActiveState
+Corporation and other parties. The following terms apply to all files
+associated with the software unless explicitly disclaimed in
+individual files.
+
+The authors hereby grant permission to use, copy, modify, distribute,
+and license this software and its documentation for any purpose, provided
+that existing copyright notices are retained in all copies and that this
+notice is included verbatim in any distributions. No written agreement,
+license, or royalty fee is required for any of the authorized uses.
+Modifications to this software may be copyrighted by their authors
+and need not follow the licensing terms described here, provided that
+the new terms are clearly indicated on the first page of each file where
+they apply.
+
+IN NO EVENT SHALL THE AUTHORS OR DISTRIBUTORS BE LIABLE TO ANY PARTY
+FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
+ARISING OUT OF THE USE OF THIS SOFTWARE, ITS DOCUMENTATION, OR ANY
+DERIVATIVES THEREOF, EVEN IF THE AUTHORS HAVE BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+
+THE AUTHORS AND DISTRIBUTORS SPECIFICALLY DISCLAIM ANY WARRANTIES,
+INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT. THIS SOFTWARE
+IS PROVIDED ON AN "AS IS" BASIS, AND THE AUTHORS AND DISTRIBUTORS HAVE
+NO OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR
+MODIFICATIONS.
+
+GOVERNMENT USE: If you are acquiring this software on behalf of the
+U.S. government, the Government shall have only "Restricted Rights"
+in the software and related documentation as defined in the Federal
+Acquisition Regulations (FARs) in Clause 52.227.19 (c) (2). If you
+are acquiring the software on behalf of the Department of Defense, the
+software shall be classified as "Commercial Computer Software" and the
+Government shall have only "Restricted Rights" as defined in Clause
+252.227-7013 (c) (1) of DFARs. Notwithstanding the foregoing, the
+authors grant the U.S. Government and others acting in its behalf
+permission to use and distribute the software in accordance with the
+terms specified in this license.
--- /dev/null
+AUTHORS
+README
+README-msqltcl
--- /dev/null
+[DEFAULT]
+pristine-tar = True
--- /dev/null
+Fix some smaller issue in the manpage brought up by lintian.
+Mostly hyphen-as-minus and two spelling issue.
+--- a/doc/mysqltcl.n
++++ b/doc/mysqltcl.n
+@@ -396,17 +396,17 @@ The port number for the TCP/IP connectio
+ The socket or named pipe for the connection.
+ .TP
+ \fB-encoding\fR \fIencodingname\fR
+-The option works similar to -encoding option in fconfigure. It support also
+-special encoding name binary. By option -binary no converting will be done be reading or writing to/from MySQL.
++The option works similar to \-encoding option in fconfigure. It support also
++special encoding name binary. By option \-binary no converting will be done be reading or writing to/from MySQL.
+ If option is not set the system encoding (see utf-8) is used.
+ Please test all input and outputs with another program to check that all
+ is the way you expect it. If option binary is not used the system procedures
+ Tcl_ExternalToUtfDString (writing) and Tcl_ExternalToUtf (reading) will be used
+ by option binary the function Tcl_GetByteArrayFromObj and Tcl_NewByteArrayObj are used.
+-If you want to manipulate binary date use -encoding binary. By handling textes set your
++If you want to manipulate binary date use \-encoding binary. By handling textes set your
+ special encoding that you want to use in your database. Consider what another system access the
+ database and what encoding they expect. It can useful
+-to use -encoding utf-8. That is standard encoding in some linux distributions and newer systems.
++to use \-encoding utf-8. That is standard encoding in some linux distributions and newer systems.
+ .TP
+ \fB-compress\fR \fIboolean\fR
+ Use compression protocol. Default is false
+@@ -442,23 +442,23 @@ Switch to SSL after handshake. Default i
+ .TP
+ \fB-sslkey\fR \fIstring\fR
+ is the pathname to the key file.
+-Used if -ssl is true
++Used if \-ssl is true
+ .TP
+ \fB-sslcert\fR \fIstring\fR
+ is the pathname to the certificate file.
+-Used if -ssl is true
++Used if \-ssl is true
+ .TP
+ \fB-sslca\fR \fIstring\fR
+ is the pathname to the certificate authority file.
+-Used if -ssl is true
++Used if \-ssl is true
+ .TP
+ \fB-sslcapath\fR \fIstring\fR
+ is the pathname to a directory that contains trusted SSL CA certificates in pem format.
+-Used if -ssl is true
++Used if \-ssl is true
+ .TP
+ \fB-sslcipher\fR \fIstring\fR
+ is a list of allowable ciphers to use for SSL encryption.
+-Used if -ssl is true
++Used if \-ssl is true
+ .RE
+ .TP
+ \fB::mysql::use\fR \fIhandle\fR \fIdatabase\fR
+@@ -498,9 +498,9 @@ is useful for scanning with a single \fI
+ .RE
+ Example:
+ .nf
+-% ::mysql::sel $db "SELECT ID, NAME FROM FRIENDS" -list
++% ::mysql::sel $db "SELECT ID, NAME FROM FRIENDS" \-list
+ {1 Joe} {2 Phil} {3 John}
+-% ::mysql::sel $db "SELECT ID, NAME FROM FRIENDS" -flatlist
++% ::mysql::sel $db "SELECT ID, NAME FROM FRIENDS" \-flatlist
+ {1 Joe 2 Phil 3 John}
+ .fi
+ Note that both list syntaxes are faster than something like
+@@ -511,7 +511,7 @@ Note that both list syntaxes are faster
+ {1 Joe 2 Phil 3 John}
+ .fi
+ If \fIsql-statement\fR is a valid MySQL statement, but not a SELECT
+-statement, the command returns -1 after executing the statement, or an empty
++statement, the command returns \-1 after executing the statement, or an empty
+ string if \fI-list\fR or \fI-flatlist\fR is specified.
+ There is no pending result in this case.
+ .sp
+@@ -593,7 +593,7 @@ The first variable in the binding list i
+ the row, and so on.
+ The variables are created in the current context (if they do not
+ already exist).
+-A variable name begining with a hyphen is not bound; it serves as a
++A variable name beginning with a hyphen is not bound; it serves as a
+ placeholder in the binding list.
+ If there are more columns than variables the extra columns are
+ ignored.
+@@ -641,7 +641,7 @@ This command can be faster as using of :
+ very big resultset will not overload client machine.
+ The scipt should process the result immadiatly because
+ it can block table (or tables) for another clients.
+-If performance matter please test all alternatives separatly.
++If performance matter please test all alternatives separately.
+ You must consider two aspects: memory consumption and performance.
+ .TP
+ \fB::mysql::seek\fR \fIhandle\fR \fIrow-index\fR
+@@ -653,8 +653,8 @@ Row index 0 is the position just before
+ row index 1 is the position just before the second row, and so
+ on.
+ You may specify a negative row index.
+-Row index -1 is the position just before the last row;
+-row index -2 is the position just before the second last row,
++Row index \-1 is the position just before the last row;
++row index \-2 is the position just before the second last row,
+ and so on.
+ An out-of-bounds row index will cause ::mysql::seek to set the new current
+ position either just before the first row (if the index is too negative),
+@@ -740,7 +740,7 @@ name lname area phone
+ % ::mysql::col $db friends {name type length}
+ {fname char 12} {lname char 20} {area char 5} {phone char 12}
+ % ::mysql::sel $db {select * from friends}
+-% ::mysql::col $db -current name type length
++% ::mysql::col $db \-current name type length
+ {fname lname area phone} {char char char char} {12 20 5 12}]
+ .fi
+ .TP
+@@ -918,7 +918,7 @@ Rollback the current transaction.
+ .TP
+ \fB::mysql::nextresult\fR \fIhandle\fR
+ If more query results exist, mysql::nextresult() reads the next query results and returns the status back to application.
+-returns -1 if no result or number of rows in the result set.
++returns \-1 if no result or number of rows in the result set.
+ .TP
+ \fB::mysql::moreresult\fR \fIhandle\fR
+ Returns true if more results exist from the currently executed query, and the application must call mysql::result to fetch the results.
+@@ -951,7 +951,7 @@ if {[mysql::isnull $row]} {
+ create new null object. It can be used to simulate returned row contents.
+ .TP
+ \fB::mysql::setserveroption\fR \fIhandle\fR \fIoption\fR
+-there are only 2 options now: -multi_statment_on and -multi_statment_off
++there are only 2 options now: \-multi_statment_on and \-multi_statment_off
+ .TP
+ \fB::mysql::shutdown\fR \fIhandle\fR
+ Asks the database server to shut down. The connected user must have SHUTDOWN privileges.
+@@ -974,7 +974,7 @@ All conflicts also generate a Tcl error.
+ All MySQL server conflicts set mysqlstatus(code) to the numeric
+ code of the MySQL error.
+ .sp
+-Any other conflict sets mysqlstatus(code) to -1.
++Any other conflict sets mysqlstatus(code) to \-1.
+ .TP
+ command
+ The last failing mysqltcl command.
--- /dev/null
+This patch adds a proper section to the mysqltcl manpage.
+--- a/doc/mysqltcl.n
++++ b/doc/mysqltcl.n
+@@ -238,7 +238,7 @@ Database Class: \\fB\\$3\\fR
+ .de UL
+ \\$1\l'|0\(ul'\\$2
+ ..
+-.TH "mysqltcl" n 3.0 ""
++.TH "mysqltcl" 3 3.0 ""
+ .BS
+ .SH "NAME"
+ mysqltcl \- MySQL server access commands for Tcl
--- /dev/null
+man-section
+tcl.m4_gnu_non_linux_ld_settings
+man-hyphen-and-spelling
--- /dev/null
+Fix incomplete linker settings in tcl.m4 on non Linux
+but GNU systems which are not detected correctly.
+This is a problem on Debian GNU/kfreebsd and GNU/Hurd.
+Patch provided by Pino Toscano <toscano.pino@tiscali.it>.
+http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=624378
+
+To take effect we've to run autoreconf after the patch
+is applied.
+
+Forwarded upstream on 28.04.2011 via email.
+--- a/tclconfig/tcl.m4
++++ b/tclconfig/tcl.m4
+@@ -1475,11 +1475,11 @@ dnl AC_CHECK_TOOL(AR, ar)
+ SHLIB_SUFFIX=".so"
+
+ SHLIB_LD="${CC} -shared"
+- DL_OBJS=""
++ DL_OBJS="tclLoadDl.o"
+ DL_LIBS="-ldl"
+ LDFLAGS="$LDFLAGS -Wl,--export-dynamic"
+- CC_SEARCH_FLAGS=""
+- LD_SEARCH_FLAGS=""
++ CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'
++ LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS}
+ if test "`uname -m`" = "alpha" ; then
+ CFLAGS="$CFLAGS -mieee"
+ fi
--- /dev/null
+#!/usr/bin/make -f
+
+# Uncomment this to turn on verbose mode.
+#export DH_VERBOSE=1
+
+DPKG_EXPORT_BUILDFLAGS = 1
+include /usr/share/dpkg/buildflags.mk
+
+DEB_HOST_MULTIARCH ?= $(shell dpkg-architecture -qDEB_HOST_MULTIARCH)
+
+%:
+ dh $@ --with quilt,autoreconf
+
+override_dh_auto_configure:
+ dh_auto_configure -- \
+ --prefix=/usr \
+ --enable-threads \
+ --mandir=/usr/share/man \
+ --infodir=/usr/share/info \
+ --with-tcl=/usr/lib \
+ --with-tclinclude=/usr/include/tcl \
+ --with-mysql-lib=/usr/lib/$(DEB_HOST_MULTIARCH)
+
+override_dh_auto_install:
+ dh_auto_install --destdir=$(CURDIR)/debian/mysqltcl
+
+ mkdir $(CURDIR)/debian/mysqltcl/usr/lib/tcltk
+ mv $(CURDIR)/debian/mysqltcl/usr/lib/mysqltcl* \
+ $(CURDIR)/debian/mysqltcl/usr/lib/tcltk
+ rm -rf \
+ $(CURDIR)/debian/mysqltcl/usr/share/man/mann \
+ $(CURDIR)/debian/mysqltcl/usr/bin \
+ $(CURDIR)/debian/mysqltcl/usr/include
+
+override_dh_makeshlibs:
+ dh_makeshlibs
+ tcltk-depends
--- /dev/null
+version=3
+http://www.xdobry.de/mysqltcl/mysqltcl-([\d\.]+).tar.gz
projects / sven / mysqltcl.git / commitdiff